Hi,
I have an older (end of 60-ties, early 70-ties) Hirsbrunner B Tuba 3 valve Compensated. Still with brass valves and not the „later“ plastic/composite rotors. The tube is 112 cm high (44“) and a bell diameter of 42,5 cm (16,7“), bore 19,5 mm (7,67“). Based on bore and bottom bow taper it is not the Modell 193 but looks very close.
I have not find any catalogues etc about this type of tuba. Could any of you perhaps identify this Hirsbrunner modell, or even has some old brochures, flyers or catalogs listing this model.
thx
Christoph
Identification of Hirsbrunner B Tuba Modell
Forum rules
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
This section is for posts that are directly related to performance, performers, or equipment. Social issues are allowed, as long as they are directly related to those categories. If you see a post that you cannot respond to with respect and courtesy, we ask that you do not respond at all.
-
Chris Mayer
- Posts: 22
- Joined: Fri Mar 08, 2024 8:55 am
- Has thanked: 0
- Been thanked: 13 times
Identification of Hirsbrunner B Tuba Modell
- Attachments
-
- Hirsbrunner B Tuba 3 Valves Compensated
- image0.jpeg (118.3 KiB) Viewed 254 times